The time now is I allready tweaked the memory latency here. Contact Us – Madshrimps – Top. At this speed the system was terrible slow compared to systems running at MHz and Alladin 5 chipset. I can get sub ambient temps 5V too, when I back down the cpu speed I can let the system run for several minutes without overheating, passively cooled that is. Page 1 of 4. This unit allows up to 11,5V, I’m not that crazy so I went up to 4,5V maximum but I did not found the board to become more stable at MHz mode.
|Date Added:||18 January 2006|
|File Size:||47.43 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
My findings about this board: Originally Posted by geoffrey. I was also able to match the performance of the GA5-SMM with that of the M, which is nice considering the fact that the Sis is one of the slower chipsets, and it has 5smj amount of L2 cache too.
I allready tweaked the memory latency here. I need to come up with some else.
A lot of software tweaking this time, sometimes you get awefull result and then without reason you get a fast superpi run. Gigabyte Open Overclocking Championship My findings My findings about this board: It appears you have not yet registered with our community.
GA-5SMM | Motherboard – GIGABYTE Global
Page 1 of 4. It ran through superpi stable at 3V but the time was really terrible, nearly doable as slow as compared to competitors on hwbot. What’s going on here? This unit allows up to 11,5V, I’m not that crazy so I went up to 4,5V maximum but I did not found the board to become more stable at MHz 5mm.
Gigabyte Technology GA-5SMM, Socket 7 Motherboard
Set this pin to “1” via a pull-up resistor to disable it, vice versa will enable it. You must power off the system first, a quick reboot was not enough so it seems.
Modifying this part on the mobo allowed my to alter VCC3 up to 3,7V which made the mobo go up to Fa front side bus. Gigabyte Overclocking Qualification Round 1.
At MHz this resulted in a superpi time of roughly seconds at lowest latency’s. I need the high FSB speed despiratly as it is the only way to the beat the competition. Unfortunately CPUCool is not working for me.
Gigabyte GA-5SMM – motherboard – micro ATX – Socket 7 – SiS530
UTJC-8 has a likewise pinout datasheet: Can not be turned of by hardware BIOS. Contact Us – Madshrimps – Top. Last edited by geoffrey: New goal would be to get x3 MHz stable but I recon that is very hard to do without exhautic phase change cooling. To register please click here No software can read the FSB bus speed but it is working for sure.
Maxmem tweak helped a lot. Gigabyte International Overclocking Tournament.
I can get sub ambient temps 5V too, when I back down the cpu speed I can let the system run for several minutes without overheating, passively cooled that is. At this speed the system was terrible slow compared to systems running at MHz and Alladin 5 gaa. The time now is HR-0 plus performs good but I’m thinking about modifying one of my waterblocks so that it fits on this gigabyte mainboard. Desoldered the LXA and added an external circuit based on a 5A switching power regulator.